Twisted Twister™ (32’) Slide

This eye-catching unit has 1 slide lane and 1 climbing lane. It is also available in a smaller 26' version. This unit uses the patented CAS System (U.S. Patent #7,300,354) to prevent quick deflation in the event of a power loss. 

The USCPSC has a mandatory requirement for inflatable slides: "Inflatable rides need a sealed chamber to prevent the rapid collapse of ceiling and walls onto the rider if the electronic power to the blower(s) fails." Slides without CAS will deflate rapidly after 5 minutes of air loss, but a slide with CAS remains firm, even after 5 minutes of air-loss". 

This unit comes with top and bottom tie-down tether straps, anchors, a heavy duty bag, and repair kit. 

• Commercial-grade quality
• 18.5oz anti-tear vinyl with anti-microbial formulation
• Double-stitched reinforced seams
• Ultra heavy-duty baffles (1500x1500 denier)
• Lead-safe vinyls and flame-retardant materials*
• 720dpi digitally printed artwork with scratch-resistant laminate
• Heavy-duty deflation zippers with velcro straps
• USA-built replaceable climb and slide covers 
• Protective sun shades
• Heavy-duty climbing grips
• Non-wax slippery slide surface
• Inflation tube backflow flap and secondary inflation tube
• NJ Approved

* All of our inflatables are constructed from materials that are lead-safe, meaning levels below 90ppm. This is well below even the strict CPSIA and California Proposition #65 compliance limits of 300ppm, meaning our inflatables are safe for children. We also use vinyl materials that are flame-retardant and meet the new California NFPA 701, large and small-scale tests